| 直读式铁谱仪广泛地应用于各类机器系统的磨损监控和润滑油油品评定 |
| 添加时间：2018/4/11 14:55:39 浏览次数： |
| 直读式铁谱仪广泛地应用于各类机器系统的磨损监控和润滑油油品评定，也可用来进行磨擦状态及磨损机理的研究，因此，它是实现机器工况监测、设备故障定位和进行微粒磨擦学研究的重要仪器直读式铁谱仪是由主机与趋势分析软件组成，其原理是将磨粒有序沉积在沉积管内，利用光电转换原理，测出表征油液样品中大磨粒（大于5μm）浓度和小磨粒（1～2μm）浓度的Dl和Ds值 The direct reading ferrography is widely used in the wear monitoring and lubricating oil evaluation of various machine systems. It can also be used to study the friction state and wear mechanism. Therefore, it is an important instrument direct reading Ferrograph for machine working condition monitoring, equipment fault location and particle friction study, which is the main engine and trend. The principle of the analysis software is to deposit the abrasive particles in the sedimentary tube in order. By using the principle of photoelectric conversion, the Dl and Ds values of the concentration of the large abrasive particles (greater than 5 mu) and the small particles (1~2 m) in the oil samples are measured. |
| 上一页 铁谱技术用以分离磨粒的装置 |
| 下一页 直读式铁谱仪广泛地应用于各类机器系统 |
Copyright © 技术支持：遨游网络